Why the charging gun is connected normally but the power cannot be charged?

‌The charging gun is connected normally, but the power cannot be charged. What's the problem? The charging gun is connected normally but cannot be charged. The reasons may include the following: ‌

1 ‌Charging pile failure ‌: The charging pile may have hardware failure or damage, resulting in failure to charge normally. You can try to use other charging piles for testing. If other charging piles can charge normally, it means that there is a problem with the original charging pile. ‌

2 ‌Charging connection problem ‌: The charging gun and the charging interface may be connected incorrectly or there may be foreign objects blocking them, such as dirty, oxidized, or damp metal contacts, which may cause poor power transmission. ‌ ‌

3 Battery problem ‌: Electric vehicle batteries may be difficult to charge due to aging or inappropriate temperature. Battery temperatures that are too low or too high will affect the charging effect. It is recommended to place the vehicle in an environment with a suitable temperature. ‌

4 ‌Charging parameter incompatibility ‌: If the parameters of the charging pile are incompatible with the vehicle, it may also cause failure to charge. Ensuring compatibility between the charging equipment and the vehicle is the key to solving the problem. ‌ ‌Charging gun failure ‌: The charging gun itself may have a fault, such as a short circuit, interface failure, or component damage, and the charging gun needs to be repaired or replaced. ‌

******Solutions to these problems include: ‌

‌ Check and clean the charging port: Make sure there are no foreign objects blocking the charging port and that the metal contacts are clean and free of dirt.

 Replace the charging pile or charging gun: If the device is aging or damaged, consider replacing a new charging device. ‌

Adjust the battery temperature: Make sure the battery is within the appropriate temperature range before charging. ‌ 

Check compatibility: Make sure the parameters and interfaces between the charging device and the vehicle are compatible. ‌ 

The above steps can effectively solve the problem of the charging gun connecting normally but not being able to charge.